27.10.2018, 23:56
(Dieser Beitrag wurde zuletzt bearbeitet: 28.10.2018, 00:00 von Broadcasttechniker.)
1. Correct assembly of the oil ring(s), especially the orientation of the gaps.
2a. Correct orientation of the oil scraper ring especially up/down orientation, very important.
2b. Do NOT overstretch the rings while mounting them. This is not so easy because they loose their circular shape when you expand them. Hence the special pliers.
But you can do without them, just be very carefull.
3. Check vertical gap of the compression ring. If you ask me, that only makes sense if you reuse the piston.
2a. Correct orientation of the oil scraper ring especially up/down orientation, very important.
2b. Do NOT overstretch the rings while mounting them. This is not so easy because they loose their circular shape when you expand them. Hence the special pliers.
But you can do without them, just be very carefull.
3. Check vertical gap of the compression ring. If you ask me, that only makes sense if you reuse the piston.
Geteiltes Wissen ist doppeltes Wissen